Animation  Chinese English
Coating Machine Series
Lifting Tipper With Mill Series
Mixing Machine Series
Lifting Charging Machine Series
IBC Bin Series
Bin Washer Series
Cone Mill、Hammer Mill Series
Pelletizer series

Contact Us



Overseas Dept:




Add: No.1 Xiner Road, Hi-Tech Park, Economic &Technical Development Zone, Wenzhou City, Zhejiang Province 325011, China



HLS Series Lab Bin Blender

The HLS-100 lab bin blender is extensively used for mixing dry powders, granules or dry powder with granule in laboratory. It’s an ideal model for groping optimal technical parameters of mixing of materials and also it’s an advanced lab equipment of mechatronics.
The complete machine of HLS-100 laboratory mixer is set on a moveable base. Its main parts consist of frame, rotating system, electrical control system and hopper, etc. And the cone-shaped mixing hopper is mainly composed of hopper body, cover and collar, press block, and butterfly valve, etc.
The hopper, which is set on the rotating axis, can turn 360 degrees. As the symmetrical axes of hopper and the rotating center line of rotating arm form an included angle, so materials with different constituents are strenuously rolling over in the closed hopper and producing high shear to achieve the best effect of mixing.
The rotating system is the key system for performing mixing function. And among them, the rotating motor which by using low speed and big torque motor is the power plant of main machine. The sensing element is installed on the rotating axes assembly. And the sensor which is installed on the frame will send out a sampling signal after the rotating body turn to the setting location and obtains information of rotational speed and position of the hopper through PLC system. It shows rotational speed and accumulated speed on touch screen and sends out stop order according to the setting time. Then the hopper stops rotating at the best discharging position by braked motor. 
The electrical control system consists of electric cabinet which is installed in the frame and the sensor, while the key control device consists of PLC controller and converter which are installed in electric cabinet. Electrical operation is main finished on the operate panel (touch screen) of electric cabinet, which consists of printer, touch screen, power switch and emergency switch. The running time and rotating speed can be displayed on the touch screen. 

click to enlarge

Zhejiang Xiaolun Intelligent Manufacturing Co., Ltd. Copyright
Address: No.1 Xiner Road, Hi-Tech Park, Economic &Technical Development Zone, Wenzhou City, Zhejiang Province 325011, China
Tel:86-577-86580227 Fax:86-577-88912420 Powered by